YOUR VISION. OUR CARVING TOOLS. KATOOLS.COM WOODTURNER.COM DEALERS

Items 1 to 10 of 63 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Grid  List 

Set Descending Direction
  1. 11361 Guinevere Small Drum Sander

    11361 Guinevere Small Drum Sander

    $34.99

    Our Small Drum Sander allows you to sand the side, bottom and base of e.g. a cup, box or predominantly small flat objects, reaching those hard to reach areas only before done by hand sanding. The Small Drum Sander is excellent for sanding flat surfaces but will also shape concave and contoured areas, however, we recommend using other sanders for large contoured shapes e.g. round or small sanders.. This sander is terrific on miniatures and virtually eliminates the need for hand sanding in micro tight areas. It is also the smallest flat inflatable sander in the world and has proven extremely useful. The sander head is 1 ¼” L x ¾” diameter. (32mm x 19mm).

    The Small Drum Sander is pumped up through an air inlet in the drive shaft located in the bottom of each sander. The air valve design leaves the bottom flat without a clumsy protruding valve on the sanders. This patented solution made it possible to make superior cylindrical drum sanders as well as two unique rounded sanders with a domed shape at the business end. Requiring little inflation, the molded rubber bulb on all sanders constantly flexes and changes shape, making them soft all the way to the edge.

    With the choice of four (4) grits from coarse to extra fine, Guinevere® eliminates scratches and allows you to apply the sander's total width against the work piece, or to use only the edge in all kinds of complex sanding. The sander actually becomes flat when pressed against a flat surface and round when pressed against a round surface i.e. the sanders conform to the underlying surface.For orders of more than three (3), please call 1-800-942-1300 for US buyers and (850) 877-7650 for international buyers.

    Learn More
  2. 11367 Guinevere Small Drum Replacement Bulb

    11367 Guinevere Small Drum Replacement Bulb

    $10.35

    Guinevere® Small REPLACEMENT Drum Sander. Short, flexible, inflatable drum sander bulb replacement fits #11361
    SHORT SANDER 1 ¼L ” X ¾” dia (31.75 x 19mm) Learn More
  3. 11363 Guinevere Small Drum Sander Sleeves - 80 Grit

    11363 Guinevere Small Drum Sander Sleeves - 80 Grit

    $5.89

    The very high quality cloth backed sandpaper used to make the sleeves for the inflatable sanders allows you to achieve a perfect finish on your project each and every time. Every sanding sleeve is made to specifically fit each inflatable sander. The sleeves eliminate scratches and allows you to apply the sander's total width against the work piece or to use only the edge in all kinds of complex sanding. This kit contains four coarse 80 grit drum sleeves. To eliminate deep scratches or gouges, start with a heavy grit working your way up to the lighter 220-320 and finer grit sanding sleeves for a final finish. 

    The main material we use on the cylindrical sleeves is VSM KK711E in which the cloth backing is extra sturdy but at the same time extremely flexible. Glueing of the aluminium oxide grain is done in several layers for optimum bonding of the grain to the cloth backing. This results in a high quality product where the grain doesn´t come off, even when doing real tough sanding jobs, including steel sanding. One small test that shows the quality of abrasives is to fold and squeeze the abrasive between your fingers and role the abrasive back and forth. With inferior quality abrasives you will see how the grains delaminate from the backing material. This is not the case with Guinevere sanding sleeves! The sharpness of the abrasive lasts a long time, however, we highly recommend using a cleaning stick to considerably extend the working life of each sleeve. 

    The sanding sleeves made to specifically fit the 11361 Small Drum Sander are available in 80, 150, 220, 320 grits. 

    Our Inflatable Short Drum Sander is perfect for sanding convex surfaces because it works best with very low air pressure. It will conform to the shape of what you are sanding, like the outside of a spoon handle. The Small Drum Sander is also ideal for difficult profiles, spindle work, walking sticks, knife handles, toys, spoons, 3D-intarsia and a myriad of other DIY applications.

     The Guinevere  sanding system can reduce your sanding time by 60%.  

    Learn More
  4. 11364 Guinevere Small Drum Sander Sleeves -150 Grit

    11364 Guinevere Small Drum Sander Sleeves -150 Grit

    $5.89

    The very high quality cloth backed sandpaper used to make the sleeves for the inflatable sanders allows you to achieve a perfect finish on your project each and every time. Every sanding sleeve is made to specifically fit each inflatable sander. The sleeves eliminate scratches and allows you to apply the sander's total width against the work piece or to use only the edge in all kinds of complex sanding. This kit contains four medium 150 grit drum sleeves. To eliminate deep scratches or gouges, start with a heavy grit working your way up to the lighter 220-320 and finer grit sanding sleeves for a final finish. 

    The main material we use on the cylindrical sleeves is VSM KK711E in which the cloth backing is extra sturdy but at the same time extremely flexible. Glueing of the aluminium oxide grain is done in several layers for optimum bonding of the grain to the cloth backing. This results in a high quality product where the grain doesn´t come off, even when doing real tough sanding jobs, including steel sanding. One small test that shows the quality of abrasives is to fold and squeeze the abrasive between your fingers and role the abrasive back and forth. With inferior quality abrasives you will see how the grains delaminate from the backing material. This is not the case with Guinevere sanding sleeves! The sharpness of the abrasive lasts a long time, however, we highly recommend using a cleaning stick to considerably extend the working life of each sleeve. 

    The sanding sleeves made to specifically fit the 11361 Small Drum Sander are available in 80, 150, 220, 320 grits. 

    Our Inflatable Short Drum Sander is perfect for sanding convex surfaces because it works best with very low air pressure. It will conform to the shape of what you are sanding, like the outside of a spoon handle. The Small Drum Sander is also ideal for difficult profiles, spindle work, walking sticks, knife handles, toys, spoons, 3D-intarsia and a myriad of other DIY applications. 

    The Guinevere  sanding system can reduce your sanding time by 60%.  

    Learn More
  5. 11365 Guinevere Small Drum Sander Sleeves - 220 Grit

    11365 Guinevere Small Drum Sander Sleeves - 220 Grit

    $5.89

    The very high quality cloth backed sandpaper used to make the sleeves for the inflatable sanders allows you to achieve a perfect finish on your project each and every time. Every sanding sleeve is made to specifically fit each inflatable sander. The sleeves eliminate scratches and allows you to apply the sander's total width against the work piece or to use only the edge in all kinds of complex sanding. This kit contains four fine 220 grit small drum sleeves. To eliminate deep scratches or gouges, start with a heavy grit working your way up to the lighter 220-320 and finer grit sanding sleeves for a final finish.  

    The main material we use on the cylindrical sleeves is VSM KK711E in which the cloth backing is extra sturdy but at the same time extremely flexible. Glueing of the aluminium oxide grain is done in several layers for optimum bonding of the grain to the cloth backing. This results in a high quality product where the grain doesn´t come off, even when doing real tough sanding jobs, including steel sanding. One small test that shows the quality of abrasives is to fold and squeeze the abrasive between your fingers and role the abrasive back and forth. With inferior quality abrasives you will see how the grains delaminate from the backing material. This is not the case with Guinevere sanding sleeves! The sharpness of the abrasive lasts a long time, however, we highly recommend using a cleaning stick to considerably extend the working life of each sleeve. 

    The sanding sleeves made to specifically fit the 11361 Small Drum Sander are available in 80, 150, 220, 320 grits. 

    Our Inflatable Short Drum Sander is perfect for sanding convex surfaces because it works best with very low air pressure. It will conform to the shape of what you are sanding, like the outside of a spoon handle. The Small Drum Sander is also ideal for difficult profiles, spindle work, walking sticks, knife handles, toys, spoons, 3D-intarsia and a myriad of other DIY applications. 

    The Guinevere  sanding system can reduce your sanding time by 60%.

    Learn More
  6. 11366 Guinevere Small Drum Sander Sleeves - 320 Grit

    11366 Guinevere Small Drum Sander Sleeves - 320 Grit

    $5.89

    The very high quality cloth backed sandpaper used to make the sleeves for the inflatable sanders allows you to achieve a perfect finish on your project each and every time. Every sanding sleeve is made to specifically fit each inflatable sander. The sleeves eliminate scratches and allows you to apply the sander's total width against the work piece or to use only the edge in all kinds of complex sanding. This kit contains four extra fine 320 grit small drum sleeves. To eliminate deep scratches or gouges, start with a heavy grit working your way up to the lighter 220-320 and finer grit sanding sleeves for a final finish.  

    The main material we use on the cylindrical sleeves is VSM KK711E in which the cloth backing is extra sturdy but at the same time extremely flexible. Glueing of the aluminium oxide grain is done in several layers for optimum bonding of the grain to the cloth backing. This results in a high quality product where the grain doesn´t come off, even when doing real tough sanding jobs, including steel sanding. One small test that shows the quality of abrasives is to fold and squeeze the abrasive between your fingers and role the abrasive back and forth. With inferior quality abrasives you will see how the grains delaminate from the backing material. This is not the case with Guinevere sanding sleeves! The sharpness of the abrasive lasts a long time, however, we highly recommend using a cleaning stick to considerably extend the working life of each sleeve. 

    The sanding sleeves made to specifically fit the 11361 Small Drum Sander are available in 80, 150, 220, 320 grits. 

    Our Inflatable Short Drum Sander is perfect for sanding convex surfaces because it works best with very low air pressure. It will conform to the shape of what you are sanding, like the outside of a spoon handle. The Small Drum Sander is also ideal for difficult profiles, spindle work, walking sticks, knife handles, toys, spoons, 3D-intarsia and a myriad of other DIY applications. 

    The Guinevere  sanding system can reduce your sanding time by 60%.

     

    Learn More
  7. 11362 Guinevere Small Drum Sleeves - Assorted

    11362 Guinevere Small Drum Sleeves - Assorted

    $6.20

    The very high quality cloth backed sandpaper used to make the sleeves for the inflatable sanders allows you to achieve a perfect finish on your project each and every time. Every sanding sleeve is made to specifically fit each inflatable sander. The sleeves eliminate scratches and allows you to apply the sander's total width against the work piece or to use only the edge in all kinds of complex sanding. This kit contains one each of 80, 150, 220 & 320 grit small drum sleeve. To eliminate deep scratches or gouges, start with a heavy grit working your way up to the lighter 220-320 and finer grit sanding sleeves for a final finish. 

    The main material we use on the cylindrical sleeves is VSM KK711E in which the cloth backing is extra sturdy but at the same time extremely flexible. Glueing of the aluminium oxide grain is done in several layers for optimum bonding of the grain to the cloth backing. This results in a high quality product where the grain doesn´t come off, even when doing real tough sanding jobs, including steel sanding. One small test that shows the quality of abrasives is to fold and squeeze the abrasive between your fingers and role the abrasive back and forth. With inferior quality abrasives you will see how the grains delaminate from the backing material. This is not the case with Guinevere sanding sleeves! The sharpness of the abrasive lasts a long time, however, we highly recommend using a cleaning stick to considerably extend the working life of each sleeve. 

    The sanding sleeves made to specifically fit the 11361 Small Drum Sander are available in 80, 150, 220, 320 grits. 

    Our Inflatable Short Drum Sander is perfect for sanding convex surfaces because it works best with very low air pressure. It will conform to the shape of what you are sanding, like the outside of a spoon handle. The Small Drum Sander is also ideal for difficult profiles, spindle work, walking sticks, knife handles, toys, spoons, 3D-intarsia and a myriad of other DIY applications. 

    The Guinevere  sanding system can reduce your sanding time by 60%.  

    Assorted Pack contains one sleeve each of the four grits.

    #11363 - 80 grit, #11364 - 150 grit, #11365 - 220  grit, #11366 - 320 grit.

    Learn More
  8. 11369 Guinevere Small Drum Brush Sleeve

    11369 Guinevere Small Drum Brush Sleeve

    $4.25

    Brush Sleeves for Small Sander. Buffing and polishing sleeve fits Guinevere® #11361 inflatable small drum sander. Made of the best quality for long-lasting use. Learn More
  9. 11368 Guinevere Small Drum Cloth Sleeves

    11368 Guinevere Small Drum Cloth Sleeves

    $8.99

    2 Cloth Polishing Sleeves for Small Sander. Polishing cloths are hand made to fit Guinevere® #11361 inflatable small drum sander like a glove. Made of the best quality for long-lasting use. Learn More
  10. 11351 Guinevere Drum Sander

    11351 Guinevere Drum Sander

    $38.99

    Our Inflatable Drum Sander is perfect for sanding flat surfaces. Because this sander works best with very low air pressure it will conform to the shape of your work, like the base and outside of a free form or turned or power carved bowl. This patented system is ideal for difficult profiles, finishing small to medium carvings, boxes, bowls, musical instruments, duck decoys, walking sticks, chairs, fine furniture, toys, spoons, 3D-intarsia, taxidermy and a myriad of other DIY applications. The Guinevere® ® Drum Sander measures 2”x 2” (50mm x 50mm).

    The Guinevere® ® Drum Sander is pumped up through an air inlet in the drive shaft located in the bottom of each sander. The air valve design leaves the bottom flat without a clumsy protruding valve on the sanders. Slightly inflated, the molded rubber sander bulb constantly flexes and changes shape, making the sanders soft all the way to the edge.

    With the choice of four (4) grits from coarse to extra fine, Guinevere® eliminates scratches and allows you to apply the sander's total width against the work piece, or to use only the edge in all kinds of complex sanding. The sander actually becomes flat when pressed against a flat surface and contours when pressed against a round surface i.e. the sanders conform to the underlying surface. Consequently, the sanders should be filled with very little air.For orders of more than three (3), please call 1-800-942-1300 for US buyers and (850) 877-7650 for international buyers.

    Learn More

Items 1 to 10 of 63 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Grid  List 

Set Descending Direction